0 Items | $0.00

Need Help? Call Us:

(951) 246-0103

Monday - Friday

9am-3pm PST

Ninja 62cu Black N2/HPA Tank

Availability: In stock

Price From: $64.95

* Required Fields

Ninja 62cu Black N2/HPA Tank

Be the first to review this product

The Ninja 62cu aluminum air cylinder is a refillable Nitrogen/High Pressure Air tank that offers a 3000 psi fill which gives approximately 800 shots per fill and no need to buy velocity limiting Co2 ever again. This is a great choice of air tank when refilling from a SCUBA tank. Choose from your choice of output pressures ranging from 850 psi all the way up to 1600 psi output.

Using a higher output pressure will result in greater velocity but will give less full powered shots per fill. See below for estimated velocity increases when used with the Drozd airguns.

Going from 850 to 1000 psi will usually give about a 70-100 FPS (feet per second) gain in velocity. And every increase of 200 psi above 1000 psi usually results in a 20-40 foot per second gain until you reach 1600 psi output pressure.

Note: Using an output pressure above 1000 psi requires that the Drozd Blackbird be powered with 15 volts.
Product Features

*62 cubic inch
*3000 psi
*D.O.T. & T.C. Approved Aluminum bottle
*5 year hydro
*3.48 pounds!!!!
*12 1/2 inches long x 3 5/8 inches diameter
*1 3/8 inches bottle to ASA
*Gives you approximately 1000 shots per fill @ 1000 psi
SRT piston –Sonic Recharge Technology piston – plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down
SPA – Shim Pressure Adjustment- change output pressure by adding or removing shims, not springs or pistons
MFV – Mini Fill Valve – Non wrist digging, low profile design fill valve
All black tactical look
Brass or optional Aluminum bonnet - see regulator parts for details
Meets all DOT, CGA and ASTM specifications
Completely rebuildable by the end user
Every regulator is hand crafted and factory tested
Super low response curve 0-50 psi from full to empty
ASTM COMPLIANT bonnet thread
ASTM COMPLIANT Low pressure burst disk
ASTM COMPLIANT Restrictor, bleed hole and safety groove
Mini Fill Valve IS hardened, plated 5000 psi rated
Reg installed to ASTM specifications

Write Your Own Review

You're reviewing: Ninja 62cu Black N2/HPA Tank