The Ninja 62cu aluminum air cylinder is a refillable N2/HPA tank that offers a 3000 psi fill which gives approximately 1000 shots per fill and no need to buy velocity limiting Co2 ever again. This is a great choice of air tank when refilling from a SCUBA tank. Choose from your choice of output pressures ranging from 1000 psi all the way up to 1600 psi output.
Note: Using an output pressure above 1000 psi requires that the Drozd Blackbird be powered with 15 volts.
Product Features
*62 cubic inch
*3000 psi
*D.O.T. & T.C. Approved Aluminum bottle
*5 year hydro
*3.48 pounds!!!!
*12 1/2 inches long x 3 5/8 inches diameter
*1 3/8 inches bottle to ASA
*Gives you 1000 shots per fill @ 1000 psi output.
Note: Using an output pressure above 1000 psi requires that the Drozd Blackbird be powered with 15 volts.
Product Features
*62 cubic inch
*3000 psi
*D.O.T. & T.C. Approved Aluminum bottle
*5 year hydro
*3.48 pounds!!!!
*12 1/2 inches long x 3 5/8 inches diameter
*1 3/8 inches bottle to ASA
*Gives you 1000 shots per fill @ 1000 psi output.
MADE IN THE USA!!!!
SRT piston –Sonic Recharge Technology piston – plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down
SPA – Shim Pressure Adjustment- change output pressure by adding or removing shims, not springs or pistons
MFV – Mini Fill Valve – Non wrist digging, low profile design fill valve
All black tactical look
Brass or optional Aluminum bonnet - see regulator parts for details
Meets all DOT, CGA and ASTM specifications
Completely rebuildable by the end user
Every regulator is hand crafted and factory tested
Super low response curve 0-50 psi from full to empty
Safety
ASTM COMPLIANT bonnet thread
ASTM COMPLIANT DOT burst disc
ASTM COMPLIANT Low pressure burst disk
ASTM COMPLIANT Restrictor, bleed hole and safety groove
Mini Fill Valve IS hardened, plated 5000 psi rated
Reg installed to ASTM specifications
SRT piston –Sonic Recharge Technology piston – plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down
SPA – Shim Pressure Adjustment- change output pressure by adding or removing shims, not springs or pistons
MFV – Mini Fill Valve – Non wrist digging, low profile design fill valve
All black tactical look
Brass or optional Aluminum bonnet - see regulator parts for details
Meets all DOT, CGA and ASTM specifications
Completely rebuildable by the end user
Every regulator is hand crafted and factory tested
Super low response curve 0-50 psi from full to empty
Safety
ASTM COMPLIANT bonnet thread
ASTM COMPLIANT DOT burst disc
ASTM COMPLIANT Low pressure burst disk
ASTM COMPLIANT Restrictor, bleed hole and safety groove
Mini Fill Valve IS hardened, plated 5000 psi rated
Reg installed to ASTM specifications
Category Navigation:
DROZDMAX COMMUNITY
